1827SB1827SBOperator's Manual / 96193004700 / 2009-07
10TO MOVE FORWARD AND BACKWARD (See Fig. 15)SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive con
11OPERATIONSKID PLATELOW POSITION (HIGH GROUND CLEAR ANCE)HEX NUTSHIGH POSITION(LOW GROUNDCLEARANCE)AUGER HOUSINGFIG. 16SCRAPER BARPRIM ERSAFETY IG NI
12OPERATIONSNOW THROWING TIPS• Go slower in deep, freezing or heavy wet snow. Use the drive speed control, NOT the ON / OFF switch, to adjust speed.•
13MAINTENANCELUBRICATION CHARTGENERAL REC OM MEN DA TIONSThe warranty on this snow thrower does not cover items that have been sub ject ed to operator
14MAINTENANCEV-BELTSCheck V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not ad just abl
15SERVICE AND ADJUSTMENTSWARNING: To avoid serious injury, beforeperforming any service or ad just ments:1. Be sure the on/off switch is in the OFF po
16SERVICE AND ADJUSTMENTS7. RELIEVE TENSION ON TRACTION DRIVE BELT IDLER and remove traction drive belt from around pulleys.HINT: Insert a 3/8"
17SERVICE AND ADJUSTMENTSINNER HOLEKLIK PINOUTER HOLEWHEEL HUBWHEELFIG. 21TO REMOVE WHEELS (See Fig. 21)• Remove the klik pin and remove wheel from a
18STORAGEImmediately prepare your snow thrower for storage at the end of the season or if the unit will not be used for 30 days or more.WARNING: Never
19Does not start 1. Fuel shut-off valve (if so 1. Turn fuel shut-off valve to OPEN position. equipped) in OFF position. 2. Safety ignition k
2IMPORTANTSafe Operation Practices for Walk-Behind Snow ThrowersThis snow thrower is capable of amputating hands and feet and throwing objects.Failure
532 42 85-38 07.09.09 SR Printed in the U.S.A.SECTION 1: LIMITED WARRANTYHusqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna pr
3CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and man u fac -tured to give best possible dependability an
4PARTS PACKED SEPARATELY IN CARTON(1) POWER CORD(198563)(1) DISCHARGE CHUTE(3) RETAINER SPRINGS (169675)(6) SHEAR BOLTS 1/4-20 x 1-3/4(192090)(6) LOC
5ASSEMBLY / PRE-OPERATIONSPEEDCONTROL RODHANDLE KNOBLOWER HANDLEPLASTIC TIEUPPER HANDLEFIG. 1SPEED CON TROL RODSPEED CONTROL BRACKETRETAINER SPRINGSPE
6ASSEMBLY / PRE-OPERATIONAUGERCONTROL LEVERAUGER CONTROL RODAUGERCONTROL BRACKETRETAINER SPRINGFIG. 6CHUTEROTATER HEAD3/8 WASHER3/8 LOCKNUTTHREADED S
7OPERATIONKNOW YOUR SNOW THROWERREAD THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations with
8OPERATIONON / OFF switch - used to STOP the engine.Drive speed control lever - used to select forward or reverse motion and speed of snow thrower.Tra
9The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glas
Comentarios a estos manuales