Husqvarna 536Li XP Manual del operador

EEEEnnnngggglllliiiisssshhhh 436 Li, 536 LiXP Oper ator ′ s manual Please r ead the operator’s manual carefully and make sure you understand the inst

GENERAL SAFETY PRECAUTIONS10 – EnglishImportantAlways use common senseIt is not possible to cover every conceivable situation you can face when using

GENERAL SAFETY PRECAUTIONSEnglish – 11• Fire Extinguisher and ShovelGenerally clothes should be close-fitting without restricting your freedom of movem

GENERAL SAFETY PRECAUTIONS12 – English• Use the chain brake as a ”parking brake” when starting and when moving over short distances, to reduce the ris

GENERAL SAFETY PRECAUTIONSEnglish – 13the saw chain. Third, the chain brake may be activated but if the bar is too close to you the brake might not ha

GENERAL SAFETY PRECAUTIONS14 – English• Use the battery in surroundings where temperatures are between -10 °C and 40 °C.• Do not expose the battery to

GENERAL SAFETY PRECAUTIONSEnglish – 15• Keep the chain’s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge.

GENERAL SAFETY PRECAUTIONS16 – English• Chain oil hole and hole for chain tensioner. The bar must be matched to the chain saw design.Saw chain• Chain

GENERAL SAFETY PRECAUTIONSEnglish – 17data for information on the size of file and gauge that are recommended for the chain fitted to your chain saw.• C

GENERAL SAFETY PRECAUTIONS18 – EnglishTension the chain as tightly as possible, but not so tight that you cannot pull it round freely by hand.536 LiXP

GENERAL SAFETY PRECAUTIONSEnglish – 19Never use waste oil! Using waste oil can be dangerous to you and damage the machine and environment.Filling wit

KEY T O SYMBOLS 2 – English Symbols on the mac hine: T ranslation of the original Swedish operating instruction.WARNING! Chain saws can be dangero

GENERAL SAFETY PRECAUTIONS20 – EnglishChecking wear on cutting equipmentCheck the chain daily for:• Visible cracks in rivets and links.• Whether the c

ASSEMBLYEnglish – 21Fitting the bar and chain536 LiXPCheck that the chain brake is in disengaged position by moving the front hand guard towards the f

ASSEMBLY22 – Englishsprocket and in the groove on the bar. Begin on the top side of the bar. • Make sure that the edges of the cutting links are facin

BATTERY HANDLINGEnglish – 23Battery The display shows the battery capacity and if there are any problems with the battery. The battery capacity is dis

BATTERY HANDLING24 – EnglishTransport and storage• Always remove the battery for storage or transport.• Store the battery and the battery charger in a

STARTING AND STOPPINGEnglish – 25Starting and stopping• Before inserting the battery into the machine, always check to see that the power trigger actu

STARTING AND STOPPING26 – EnglishStoppingThe machine is deactivated by pressing the start/stopp button on the keypad (green LED off).Note! To avoid in

WORKING TECHNIQUESEnglish – 27Before use:1 Check that the chain brake works correctly and is not damaged.2 Check that the rear right hand guard is not

WORKING TECHNIQUES28 – Englishlose control. Both situations can cause serious personal injury.6 Before moving your chain saw deactivate it and lock th

WORKING TECHNIQUESEnglish – 29the saw chain is jamming, the saw may be pushed back at you.8 Unless the user resists this pushing force there is a risk

KEY T O SYMBOLS English – 3 Symbols in the operator’ s manual: Deactiv ate the machine by pressing the start/stop button on the keypad. CAUTION!

WORKING TECHNIQUES30 – EnglishThe following instructions describe how to handle the commonest situations you are likely to encounter when using a chai

WORKING TECHNIQUESEnglish – 31• Wind direction• Arrangement of branches• Weight of snow• Obstacles within the reach of the tree: for example, other tr

WORKING TECHNIQUES32 – EnglishMake the felling cut about 3-5 cm (1.5-2 inches) above the bottom directional cut.Set the spike bumper (if one is fitted)

WORKING TECHNIQUESEnglish – 33Cutting trees and branches that are in tensionPreparations: Work out which side is in tension and where the point of max

WORKING TECHNIQUES34 – EnglishLimbingMake sure that you can stand and move about safely. Work on the left side of the trunk. Work as close as possible

MAINTENANCEEnglish – 35GeneralThe user must only carry out the maintenance and service work described in this Operator's Manual. More extensive w

MAINTENANCE36 – EnglishPower trigger lockout• Make sure that the power trigger is locked at the idle setting when the power trigger lockout is release

MAINTENANCEEnglish – 37Cooling systemTo keep the working temperature as low as possible the machine is equipped with a cooling system.The cooling syst

38 – EnglishMAINTENANCEMaintenance scheduleThe following is a list of the maintenance steps that must be performed on the machine. Most of the items a

English – 39MAINTENANCETroubleshooting scheduleKeypadPossible fault codes on the chain saw keypad.BatteryTroubleshooting the battery and/or the batter

CONTENTS 4 – English Contents KEY TO SYMBOLS Symbols on the machine: ... 2Symbols on the battery and/or on the

40 – EnglishTECHNICAL DATATechnical dataNote 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/

English – 41TECHNICAL DATAGuide bar and saw chain combinationsThe following cutting attachments are approved for the models Husqvarna 436 Li and 536 L

1154476-26´®z+VO^¶6[¨´®z+VO^¶6[¨2013-06-12

English – 5 INTR ODUCTION Dear Customer , Cong ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates

6 – English WHA T IS WHA T? What is what on the c hain saw?1516171819201781093462931302833265343227242511223 2221141312 1 Front hand guard2 Front

GENERAL SAFETY PRECA UTIONS English – 7 General po wer tool safety warnings W ork area safety • Keep work area clean and well lit. Cluttered or d

GENERAL SAFETY PRECA UTIONS 8 – English• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other con

GENERAL SAFETY PRECAUTIONSEnglish – 9a result of tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper p